Speedi-Bleed is the ideal shop or race track tool. Use before race day to get ready for the big meet or between races to provide optimum braking performance and assurance.
* Push bottle female coupler onto adapter male coupler
Fill Speedi-Bleed bottle with fresh brake fluid
STEP 4
* If bleeding / flushing all 4 wheels, fill bottle 80-90%
* Firmly re-tighten bottle cap after filling bottle
* Bottle can be pre-filled away from vehicle to prevent spills
Connect bottle air hose to tire
STEP 5
* Make sure pressure regulator is backed off before connecting
* Pro & Complete Kits – push air nozzle onto tire valve and twist
nozzle clockwise 1/3 turn to release and seal pressure
Set working pressure
STEP 6
* Starting with 0 psi, slowly adjust regulator to 10-15 psi
* Observe adapter / brake reservoir for any signs of leaks.
No leak should occur, but if so, lower pressure until leak subsides
Open bleeder screws
STEP 7
* Open for 10-15 seconds, or until fluid is clean and bubble free.
* A clear hose and catch container can be used to collect the old fluid
* If bleeding multiple wheels, do each wheel in sequence
SPEEDI-BLEED REMOVAL PROCEDURE
1. Remove air hose from tire
2. Crack open bottle cap (about 1/4 turn) to release pressure
3. Turn regulator knob counter clockwise (to setup tool for future usage)
4. Disconnect fluid hose from adapter
5. Remove adapter from master cylinder reservoir
6. Replace master cylinder filler cap
